Zhejiang Jingliang Copper-Tube Products Co., Ltd

Wholesale Medical Gas Copper Tube

Medical Gas Copper Tube

-- Steady & Reliable Manufacturer --

Ultra-Pure Conduits for Life-Critical Healthcare Systems

Medical Gas Copper Tubes are highly specialized, ultra-clean copper pipes engineered to convey life-sustaining gases—including oxygen, nitrous oxide, medical air, carbon dioxide, and helium—within hospitals, surgical centers, and clinics. Unlike standard commercial plumbing pipes, medical gas tubing is subject to rigorous purity standards because any internal residue, hydrocarbons, oil, or dust could ignite in oxygen-enriched environments or endanger patient safety. At Zhejiang Jingliang, our medical gas copper tubes are manufactured from premium C12200 phosphorus-deoxidized copper, strictly adhering to international medical pipeline standards such as ASTM B819, EN 13348, and NFPA 99.

To ensure maximum safety, every medical gas copper tube undergoes a multi-stage cleaning and degreasing process. The internal surface is thoroughly washed with specialized solvent degreasers, rinsed, and dried with hot oil-free nitrogen gas to achieve a residual hydrocarbon limit far below strict regulatory thresholds. Immediately after drying, each tube is sealed with protective end caps or color-coded plugs to lock in cleanliness during transit. Available in both hard drawn straight lengths for overhead main trunk lines and soft annealed coils for localized connection points, Jingliang medical gas copper tubes offer healthcare facilities an uncompromised, biostatic, and long-lasting piping solution.

Standard Compliance and Cleanliness Parameters

PropertyMedical Gas Copper Tube Specification
Material GradeC12200 (Cu-DHP)
Standard ComplianceASTM B819 (Type K / Type L) / EN 13348 / NFPA 99
Cleanliness LimitMax 0.0035 g/ft² (0.038 g/m²) residue soluble in solvent
Temper OptionsHard Drawn (H58) / Soft Annealed (O60)
Outer Diameter (OD)1/4" (6.35mm) to 4-1/8" (104.78mm)
Wall Thickness0.030" (0.76mm) to 0.125" (3.18mm)
Internal PurgingNitrogen Purged and Factory Capped
Marking & LabelingContinuous Inkjet Line: "OXY / MED / K / L" Blue/Green Color Coding
Hydrostatic Pressure100% Tested at 1.5x Maximum Operating Pressure
Antimicrobial ActionInherent copper biostatic surface against hospital pathogens

Hospital Oxygen Networks, Intensive Care, and Surgical Suites

Medical gas copper tubes are mandatory for "Hospital Oxygen Pipeline Networks" supplying bedside wall outlets and ceiling pendants. They are installed in "Intensive Care Units (ICU)" and "Operating Rooms" to deliver anesthetic gases like nitrous oxide and surgical air. "Medical Vacuum Systems" rely on large-diameter copper tubes to remove fluids and air contaminants safely. They are also used in "Hyperbaric Oxygen Chambers," "Dental Clinic Gas Distribution," "Pharmaceutical Cleanroom Facilities," and "Hospital Cryogenic Tank Interconnections."

Degreased Oxygen Safety and Natural Antimicrobial Protection

The paramount advantage of our medical gas copper tube is its "Guaranteed Zero-Hydrocarbon Purity," eliminating the risk of internal gas combustion in high-pressure oxygen service. The material’s "Inherent Antimicrobial Properties" actively eradicate bacteria, viruses, and fungi on contact, reducing hospital-acquired infections (HAIs). "Heavy Wall Construction" under ASTM B819 ensures high burst resistance and safety against accidental physical impacts. Furthermore, "Continuous Color-Coded Marking" allows easy identification by field technicians, ensuring flawless compliance with health and building safety codes.

Hygienic Capped Packaging and Quality Documentation

Every medical gas tube is plugged with color-coded polymer caps immediately after nitrogen purging. Tubes are packaged in sealed polyethylene bundles and wrapped in sturdy wooden crates. Payment terms are 30% T/T deposit and 70% L/C at sight. Exports leave via Ningbo or Shanghai ports accompanied by full "Cleanliness Audit Certificates," "ASTM B819 Compliance Letters," and "Material Test Reports."

  • Q: What is the main difference between ASTM B819 medical tube and standard plumbing copper tube?
  • A: ASTM B819 tubing is specifically degreased, nitrogen-purged, and capped to remove flammable hydrocarbons and internal debris, making it safe for medical oxygen.
  • Q: How are medical gas tubes identified during site installation?
  • A: Our tubes are continuously ink-jet printed with "OXY/MED" markings and color-coded green or blue according to Type K or Type L wall thickness specs.
ABOUT US
30+YEARS OF
EXPERIENCE
About Us

A Reliable Partner of the Copper Tube Industry

Zhejiang Jingliang Copper-Tube Products Co., Ltd is China Medical Gas Copper Tube and Medical Gas Copper Tube Factory, which was formerly Shangyu Jingliang Copper Material Factory, founded in 1994 and has been deeply involved in the copper tube industry for over three decades. The company primarily produce various specifications of products such as copper tubes, brass tubes, copper square tubes, fin copper tubes, copper capillary tubes, condenser copper tubes, copper evaporator tubes, and conductive rods, which are of quality and have earned the trust and acclaim of customers both domestically and internationally.

Wide Applications:

These products are widely used in various fields including air conditioning, refrigeration, heat exchange, sanitary ware, automotive, machinery, electric furnaces, and chemical industries.

Convenient Transportation:

Strategically located in Tangpu Town, renowned as the “home of copper tubes” in East China. Our company enjoys a prime location, adjacent to the Shangsan Expressway and National Highway 104, and is conveniently situated just over 70 kilometers from Hangzhou and Ningbo, ensuring easy accessibility and a business position.

Strong Financial Resources:

With its strong financial resources and advanced copper tube processing technology, our company holds an advantageous position in market share, brand value, technological content, and product quality, becoming a preferred supplier for many listed groups.

Large Scale Production:

The company occupies an area of over 20,000 square meters, with a construction area of 12,800 square meters. In 2022, our annual production exceeded 7,500 tons, with a value output of up to 450 million yuan, demonstrating our strong production capacity and market competitiveness.

Comprehensive Industry Chain:

Jingliang has now developed into a complete industrial chain integrating smelting, extrusion, drawing, precision rolling, and annealing. It has been awarded multiple honors, including "Top Ten Copper Tube Enterprises" and "Leading Taxpayer in the Copper Tube Industry".

Smart Manufacturing:

Jingliang Copper-Tube Products will better integrate the concept of factory construction into its corporate development strategy, insist on refining technology and polishing products more finely, and the future of "intelligent manufacturing".

Genuine Cooperation:

Zhejiang Jingliang Copper-Tube Products Co.,Ltd warmly welcomes friends from all walks of life to visit and offer guidance. We look forward to joining hands with you to create a brilliant future together.

Message Feedback